Injection molded automotive phone holder with adjustable side arms, bottom support and clip geometry for mounting on the car's air vent. Compact, anti-glare design, suitable for passenger cars and commercial vehicles.
This example is a demonstrative concept developed to illustrate the design, prototyping and industrialisation capabilities of DINAMIC SRL. It does not represent a commercial project of a client.
Dimensional Specifications
| Overall dimensions | 95 × 65 × 110 mm |
| Recommended wall thickness | 2.0 – 2.5 mm |
| Ideal wall thickness | 2.2 mm |
| Internal ribs | for stiffness, instead of thick walls |
| Side arm openings | adjustable, with clip geometry |
Estimated Weight
| PC-ABS (range) | 70 – 95 g |
| ABS (range) | 65 – 90 g |
| PC-ABS working estimate | 82 g |
Estimates are based on the reference geometry and on typical densities for each material. Final weight will be validated at the first pilot injection run.
Recommended Material
Main recommendation
Automotive impact resistance, dimensional stability and premium surface quality, suitable for the cabin.
Alternative
Cost-effective solution for lower thermal requirements, with good mechanical properties.
Design Features
Surface Finish
| Exterior | Matte anti-glare finish, suitable for in-vehicle use |
| Contact areas | Light texture for secure grip |
| Colours | Matte black · Anthracite grey |
Moldability Recommendations
Mold Concept
Recommended Mold
2-plate mold with possible sliders for the side openings
Cavities at launch
1 cavity at launch
Scaling option
Multi-cavity mold after design validation
Special note
The mounting clip can be molded separately and assembled afterwards
Compliance
Materials free of hazardous substances, REACH compliant
Rounded edges, no hazardous detachable parts
Thermal stability suitable for the cabin (up to 85°C)
UV resistance testing for exposure to sunlight
Send us the 3D drawing or the specifications and we will prepare your quote within 48 hours.